PF>=larger than 0.97/347VAC, PF>= larger than 0.93/480VAC at full load (Please refer to "Power Factor Characteristic" curve)
TOTAL HARMONIC DISTORTION
THD less than 20% when output loading larger than 50% (larger than 60% only for 15V model )at 230VAC/277VAC/347VAC input ; THD less than 20% when output loading larger than 75% at 480VAC input
AC CURRENT (Typ.)
0.38A / 347VAC 0.28A / 480VAC
COLD START 25A(twidth=900µs measured at 50% lpeak ) at 480VAC
Less than 0.75mA / 480VAC
95 ~ 108%
Protection type : Constant current limiting, recovers automatically after fault condition is removed
Constant current limiting, recovers automatically after fault condition is removed
23 ~ 27V
Protection type : Shut down o/p voltage with auto-recovery or re-power on to recovery
Shut down o/p voltage, recovers automatically after temperature goes down
-40~ +70°C (Refer to "Derating Curve")
20 ~ 95% RH non-condensing
STORAGE TEMP., HUMIDITY
-40 ~ +80°C , 10 ~ 95% RH
10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes
SAFETY & EMC
SAFETY STANDARDS Note.7
U8750, CSA C22.2 No. 250.0-08(except for 42V,48V, 54V), IP65 or IP67 approved
I /P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
I /P-O/P, I /P-FG, O/P-FG:100M Ohms / 500VDC / 25°C/ 70% RH
Compliance to EN55015, EN61000-3-2 Class C ( larger than 50% load, larger than 60% load only for 15V model) ; EN61000-3-3, FCC part 15 class B
Compliance to EN61000-4-2,3,4,5,6,8,11, EN61547, light industry level (surge 4KV), criteria A
174.9K hrs min. MIL-HDBK-217F (25°C )
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. Please refer to "DRIVING METHODS OF LED MODULE".
5. Derating may be needed under low input voltages. Please check the static characteristics for more details.
6. A type only.
. Safety and EMC design refer to EN60598-1, CNS15233, GB7000.1.
8. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.
9. Refer to warranty statement.
Packing & Shipping
LED Lighting Driver Meanwell LED Driver 100W HVG-100-20A Waterproof Electronic LED Driver
What Certification do we have?
Why Choose us?
SUCCESS IS A RESULT OF OUR COMMITMENT TO A QUALITY SERVICE IN PARTNERSHIP WITH OUR CLIENTS
1. What we sell is 100% Genuine Mean Well Power Supply;
2. Small quantity orders acceptable;
3. We will choose the most suitable shipping way for you and inform you the cost advance, decision will be made by you;
4. We have larger stocks and this support us can make a very prompt shipping;
5. To assure you the maximum comfort and satisfaction, we accept pay via T/T, Paypal, Western Union;
6. Price could be negotiated for more and large quantity;
7. Your enquiry will be quickly responsed, we will choose the most suitable products and quote the most competitive price for you.
If you are interested in other models, please hit below links for details....